navigation-menu
close
Free trial

Heading 7607

Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm
About this page

7607119076

  • Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm
  • Not backed
  • Rolled but not further worked
  • Of a thickness of not less than 0,021 mm but not more than 0,2 mm
  • Other
  • Aluminium and magnesium alloy strip or foil: - of an alloy conforming to standards 5182-H19 or 5052-H19, - in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm, - of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, - of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm, - of a flatness measurement: I-unit ±4, - having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, - of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 % for use in the manufacture of slats for blinds
  • Of a thickness of 0.2 mm
  • Without internal layers of other material
  • For use as body panels in the car industry

At Taric Support, we’re driven by customs data.

We’re customs information experts who thrive on complexity. Digging into legislation and data is what we do best. We carefully analyse every possible source to provide you with a wide range of relevant and up to date customs information. With this meticulous approach, we help you avoid costly mistakes and delays. Because we’ve been through the process ourselves, we understand exactly what it takes to meet all customs formalities efficiently and confidently.

Read our manifesto