Heading 7607

Name: Studio Bruikbaar
Price range: $

Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm

About this page

Commodity Code
Description
7607 11
Not backed
- 7607 11
  Rolled but not further worked
  - 7607 1111
    Of a thickness of less than 0,021 mm
    - 7607 1111
      In rolls of a weight not exceeding 10 kg
      - 7607 1111 11
        Of a thickness of 0,007 mm or more but less than 0,021 mm
        7607 1111 11
        Consigned from Thailand
        7607 1111 19
        Other
      - 7607 1111 90
        Other
    - 7607 1119
      Other
  - 7607 1190
    Of a thickness of not less than 0,021 mm but not more than 0,2 mm
    - 7607 1190 44
      Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 %
      - 7607 1190 44
        Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers
        7607 1190 44
        Of a thickness of not less than 0,03 mm, without internal layers of other material
        7607 1190 46
        Other
      - 7607 1190 48
        Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil
        7607 1190 48
        Of a thickness of not less than 0,03 mm, without internal layers of other material
        7607 1190 49
        Other
      - 7607 1190 51
        Other
        7607 1190 51
        Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips
        7607 1190 52
        Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles
        7607 1190 52
        Without internal layers of other material
        7607 1190 52
        Alloyed, for use as body panels in the car industry
        7607 1190 53
        Other
        7607 1190 54
        Other
        7607 1190 56
        Other
    - 7607 1190 65
      Plain aluminium foil with the following parameters: - an aluminium content of 99,98 % or more - a thickness of 0,070 mm or more but not more than 0,125 mm - with a cubic texture of a kind used for high voltage etching
      - 7607 1190 65
        Without internal layers of other material, in coils or in coiled strips
      - 7607 1190 67
        Other
    - 7607 1190 71
      Other
      - 7607 1190 71
        Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers
        7607 1190 71
        Of a thickness of not less than 0,03 mm, without internal layers of other material
        7607 1190 72
        Other
      - 7607 1190 73
        Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil
        7607 1190 73
        Of a thickness of not less than 0,03 mm, without internal layers of other material
        7607 1190 74
        Other
      - 7607 1190 75
        Aluminium and magnesium alloy strip or foil: - of an alloy conforming to standards 5182-H19 or 5052-H19, - in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm, - of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, - of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm, - of a flatness measurement: I-unit ±4, - having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, - of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 % for use in the manufacture of slats for blinds
        7607 1190 75
        Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips
        7607 1190 76
        Of a thickness of 0.2 mm
        7607 1190 76
        Without internal layers of other material
        7607 1190 76
        For use as body panels in the car industry
        7607 1190 77
        Other
        7607 1190 78
        Other
        7607 1190 79
        Other
      - 7607 1190 91
        Other
        7607 1190 91
        Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips
        7607 1190 92
        Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles
        7607 1190 92
        Without internal layers of other material
        7607 1190 92
        Alloyed, for use as body panels in the car industry
        7607 1190 93
        Other
        7607 1190 94
        Other
        7607 1190 96
        Other
- 7607 19
  Other
  - 7607 1910
    Of a thickness of less than 0,021 mm
    - 7607 1910 11
      Of a thickness of 0,007 mm or more but less than 0,021 mm, in rolls of a weight not exceeding 10 kg, not further worked than rolled, embossed
      - 7607 1910 11
        Consigned from Thailand
      - 7607 1910 19
        Other
    - 7607 1910 90
      Other
  - 7607 1990
    Of a thickness of not less than 0,021 mm but not more than 0,2 mm
    - 7607 1990 75
      Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips
    - 7607 1990 84
      Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles
      - 7607 1990 84
        Without internal layers of other material
        7607 1990 84
        Alloyed, for use as body panels in the car industry
        7607 1990 93
        Other
        7607 1990 93
        Hot rolled coils, alloyed, tension levelled, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels
        7607 1990 94
        Other
      - 7607 1990 95
        Other
    - 7607 1990 96
      Other
7607 20
Backed
- 7607 2010 00
  Of a thickness (excluding any backing) of less than 0,021 mm
- 7607 2091
  Of a thickness (excluding any backing) of not less than 0,021 mm but not more than 0,2 mm
  - 7607 2091 00
    Aluminium Composite Panel
  - 7607 2099
    Other
    - 7607 2099 10
      Aluminium foil, in rolls: - coated on one side with polypropylene or polypropylene and acid-modified polypropylene and on the other with polyamide and polyethylene terephthalate, with adhesive layers between them, - with a width of 200 mm or more, but not more than 400 mm, - with a thickness of 0,138 mm or more, but not more than 0,168 mm, for use in the manufacture of lithium-ion battery cell covers
    - 7607 2099 90
      Other

Go up to Chapter 76

7607199093Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm
Not backed
Other
Of a thickness of not less than 0,021 mm but not more than 0,2 mm
Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles
Without internal layers of other material
Other
Hot rolled coils, alloyed, tension levelled, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels

It all starts with a valid HS code

The code above is a complete TARIC code. This means it can be used for import declarations for the EU. For export declarations, you can use the corresponding CN-code, which consists of the first eight digits of this code. Note that the first six digits of this code are the HS-code, which is the same internationally. When classifying a product, you need to check a lot of different data sources. You can find them all in our online platform, just one mouse click away.

We provide customs information for the UK, Switzerland and the EU, as well as national trade tariff information for many EU member stated, such as Belgium, the Netherlands, Sweden and Germany.

This information has been bundled into a user-friendly web application.

Request a free trial Find out more about our platform Read more about our API

You will be able to quickly check conditions for import and export, validate your declaration lines to ensure you file a correct customs declaration and use the duty calculator to determine the amount of duties to be paid.

The information in our platform is also available via an API or via an Excel upload-download routine called ABC (Automatic Batch Control). This makes it possible to integrate it into your own systems automatically.

The API and ABC solutions allow you to automatically validate and enrich master data files, order manifests and/or shipments, allowing you to do in seconds what would take days to do manually.

If you are dealing with high volumes, diverse commodity codes and/or are facing problems acquiring the information for a customs declaration quickly enough our solutions will speed up your process significantly.

At Taric Support, we’re obsessed by customs data.

As customs information experts ourselves, we love to dive into the nitty-gritty details. We feel that seeking out complex legislative information is a thrill. We love to study all possible data sources meticulously so that we can assure that all information for a commodity code is complete and up-to-date. And so we also know what it takes to meet all customs formalities.

Read our manifesto